Introducing the NEW Blo Brush Bundle featuring our Blo out Brush in bbay pink and our NEW 25mm Blo Barrel Automatic Curler in baby pink. This is the perfect combo for effortlessly epic hair.

- TOTE BAG NOT INCLUDED -

 Blo Out Brush FEATURES:

• Colour: Baby pink
• Power: 1000W
• Voltage: 220V
• Cool Tip
• Cable Length: 160cm
• Applicable Hair; Dry & Wet
• Plug Type: AU Plug

Blo Barrel Automatic Curler FEATURES:

• Automatic curling action – the barrel turns clockwise and anticlockwise for perfect, even curls
• 25mm barrel – for lush waves and curls
• Sleek design – includes LCD screen to control temperature
• Temperature control – from 150°C – 210°C
• Auto-shut off – automatically turns off after one hour
• Swivel cord – 2.5m cord with 360 rotation allows for easy handling with no cord tangles
• Styling protective glove – our styling protective glove will help protect hands during use
• Universal voltage – plug and play anywhere around the world

HOW TO BLO OUT BRUSH:

1. Connect the plug to the power supply. To turn on change setting to either COOL, LOW OR HIGH. 

Please note device will become hot immediately.  

The settings are adjustable to meet the requirements for all hair types and textures. Cool can be used to set the hair or for very damaged/thin hair. Low is a hot setting on low speed which gives you more control for thin/damaged hair. High setting is hot on the most powerful setting for quicker drying time and usually recommended for thicker hair types.

2. Choose the temperature according to your hair type. We suggest starting at the lowest temperature and changing as per needed. Fine or damaged hair should stay at a lower temperature and thick or coarse hair will generally need to be at a higher temperature. 

3. The appliance can be used on DRY or WET hair, but we recommend to use on clean towel dried hair for best results. From WET hair you should use a heat protective spray and also if you are wanting the style to last longer a texture spray or hold spray is recommended. 

4. Depending on hair thickness and texture we always recommend sectioning hair as this will give you more control and quicker results. Placing the appliance from roots to ends. If you want to create more volume, use the appliance horizontally at the roots. (in an upwards motion) To smooth out the mid lengths and ends use the appliance on top of the sections and be sure to have tension on the hair and the brush head.  If you want to create a bounce/curl you will need to roll up the brush and turn to cool or off and let sit to create a flick in either direction. Never leave the appliance on the same section of hair for a prolonged amount of time as this can cause heat damage.

Always be sure to clean the air inlet / filter regularly as this can not be covered or blocked whilst in use ( do not remove bottom part of the brush )  

HOW TO AUTOMATIC CURLER:

1. Connect the plug to the power supply. To turn on press the power symbol button which is in the middle of the ’-’ and ‘+’ buttons. The ’-’ and ‘+’ buttons indicate temperature control, with the right button increasing the temperature and left button decreasing the temperature.

2. Choose the temperature according to your hair type. We suggest starting at the lowest temperature and changing as per needed. Fine or damaged hair should stay at a lower temperature and thick or coarse hair will generally need to be at a higher temperature. See temperature guide below.

- Fine or damaged hair 150C - 170C
- Medium or normal hair 170C - 190C

- Thick or coarse hair 190C - 210C

3. Ensure your hair is dry and clean, clamp towards the bottom of the barrel depending on hair length. Press ‘<’ to curl your hair in a left rotating direction and ‘>’ to curl your hair in a right rotating direction. Hold down the ‘<’ or ‘>’ button down to spin the barrel. Be careful to take your finger off the button before you approach your scalp / head area. The barrel will continue to spin if you keep your finger on the button. You can also wrap the hair around the tool without using the rotational buttons like a normal curling wand. Use the 'ON' 'OFF' sliding switch on the side of the handle to turn automatic feature on or off. To release the curl undo the clamp ( do not wind the opposite way ) After finishing each wave/curl press the ‘HOME’ button to reset clamp. ‘HOME’ turns the barrel back to the starting position, then repeat for another wave/curl.

4. Hold for 3-10 seconds depending on how defined you want your curls. Unwrap the hair or release the clamp to remove the hair from the barrel. Repeat the same action on the rest of your hair. Smaller sections create a tighter curl and bigger sections create a looser curl. Brush out for an on-trend look. It is recommended to change the direction of the curl on either side of the head.

5. Wait for hair to cool then brush or comb the curls out for waves. After using, turn the power off and ensure it cools down before safely storing away.

The settings are adjustable to meet the requirements for all hair types and textures. Cool can be used to set the hair or for very damaged/thin hair. 

BLO OUT BRUSH: 

• Cool can be used to set the hair or for very damaged/thin hair ( please note this is not cold air )
• Low is a hot setting on low speed which gives you more control for thin/damaged hair
• High setting is hot on the most powerful setting for quicker drying time and usually recommended for thicker hair types

AUTOMATIC CURLER: 

• Fine or damaged hair 150C - 170C
• Medium or normal hair 170C - 190C
• Thick or coarse hair 190C - 210C
   

BLO OUT BRUSH:

• Length 33cm
• Width 11cm
• 700GRAMS

AUTOMATIC CURLER:

• 25mm Barrel width
• 38cm total length
• 19cm Barrel length ( tip to handle )
• 19cm Handle length
• 5cm With

Before cleaning this appliance always make sure the appliance is turned off and not connected to any power source. Always allow to cool prior to cleaning. 

This appliance you need to always make sure the air inlet (very bottom of the appliance where the cord meets the appliance) is NEVER BLOCKED while in use and is always clear from excess dust (this tends to build up over time) You need to regularly check this and remove any dust/residue prior to use. 

There is no need to take any parts of the appliance apart to do this – simply wipe off with a clean cloth. You also need to clean any excess hair left behind on the bristles / brush head, usually a tail comb or removing with fingers is fine. 

If anything, abnormal occurs please email contactblobrush@gmail.com for support. 

Do not attempt to repair appliance yourself. Attempting to repair appliance yourself will void the warranty.